Přihlášení

X20BC008T

Short description

Bus controller	OPC UA FX

General information

B&R ID code	0xF629
Status indicators	Module status, bus function
Diagnostics
Module status	Yes, using LED status indicator and software
Bus function	Yes, using LED status indicator and software
Power consumption
Bus	3.5 W
Additional power dissipation caused by actuators (resistive) [W]	-
Certifications
CE	Yes
UKCA	Yes

Interfaces

Fieldbus	OPC UA Field eXchange (FX)
Variant	2x shielded RJ45 (switch)
Line length	Max. 100 m between 2 stations (segment length)
Transfer rate	1 Gbit/s
Transfer
Physical layer	100BASE-TX/1000BASE-T
Half-duplex	No
Full-duplex	Yes
Autonegotiation	Yes
Auto-MDI/MDIX	Yes
Min. cycle time
Fieldbus	400 µs
X2X Link	400 µs
Synchronization between bus systems possible	Yes

Electrical properties

Electrical isolation	OPC UA FX isolated from bus and I/O

Operating conditions

Mounting orientation
Horizontal	Yes
Vertical	Yes
Installation elevation above sea level
0 to 2000 m	No limitation
>2000 m	Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529	IP20

Ambient conditions

Temperature
Operation
Horizontal mounting orientation	-25 to 45°C
Vertical mounting orientation	-25 to 40°C
Derating	See section "Derating".
Storage	-40 to 85°C
Transport	-40 to 85°C
Relative humidity
Operation	5 to 95%, non-condensing
Storage	5 to 95%, non-condensing
Transport	5 to 95%, non-condensing

Mechanical properties

Note	Order 1x terminal block X20TB12 separately. Order 1x power supply module X20PS9400 or X20PS9402 separately. Order 1x bus base X20BB80X separately.
Pitch	37.5^+0.2 mm

Materiálové číslo:

X20BC008T

Popis:

Communication technology: OPC UA Field eXchange (FX)
I/O configuration via OPC UA FX
400 µs minimum cycle time
Integrated switch for daisy-chaining
2x 1 Gbit/s full-duplex mode
OPC UA diagnostics and module diagnostics at runtime via OPC UA clients

This bus controller provides OPC UA FX functions. This allows any OPC UA clients access to read or write data from I/O modules connected to the bus controller.

Povinné příslušenství

System modules for bus controllers

X20BB80X	X20 bus controller base for X20BC008T and X20 power supply module, X20 end cover plates (left and right) X20AC0SL1/X20AC0SR1 included
X20PS9400	X20 power supply module, for bus controller and internal I/O power supply X2X Link power supply
X20PS9402	X20 power supply module, for bus controller and internal I/O power supply, X2X Link supply, supply not galvanically isolated

Terminal blocks

X20TB12	X20 terminal block, 12-pin, 24 VDC keyed

Certifikáty	Verze (datum)	Ke stažení
EU Declaration ATEX X20		PDF / 218 KB Pro stažení je potřeba se přihlásit.
EU Declaration of conformity PLC X20		PDF / 169 KB Pro stažení je potřeba se přihlásit.
UK Declaration PLC X20		PDF / 151 KB Pro stažení je potřeba se přihlásit.

Dokumentace	Verze (datum)	Ke stažení
Data sheet X20BC008T		PDF / 7 MB Pro stažení je potřeba se přihlásit.
Installation- / EMC-Guide		PDF / 20 MB Pro stažení je potřeba se přihlásit.
X20 System User´s Manual		PDF / 7 MB Pro stažení je potřeba se přihlásit.

E-CAD (Electro or EPLAN Templates)	Verze (datum)	Ke stažení
X20 EPLAN P8 from V2.4		EXE / 160 MB Pro stažení je potřeba se přihlásit.

Firmware Upgrades	Verze (datum)	Ke stažení
Firmwareupgrade X20BC008T		ZIP / 69 MB Pro stažení je potřeba se přihlásit.

M-CAD (Mechan. Templates)	Verze (datum)	Ke stažení
3D File STEP/DXF X20BC and X20IF Module		ZIP / 1 MB Pro stažení je potřeba se přihlásit.