General information
Status indicators Network activity for each channel, link/collision for each channel, supply voltage
Diagnostics
Bus function Yes, using LED status indicator
Hub power supply Yes, using LED status indicator
Type 8-port industrial hub (layer 2)
LED name
Network activity RX (orange)
Link/Collision L/C (Link = Green, Collision = Red)
Supply voltage OK (orange)
Certifications
CE Yes
UL cULus E115267
Industrial control equipment
LR ENV1
ABS Yes
Interfaces
Signal Ethernet
Variant Shielded RJ45
Line length Max. 100 m between 2 stations (segment length)
Transfer rate 10/100 Mbit/s
Transfer
Physical layer 10BASE-T/100BASE-TX
Half-duplex Yes
Full-duplex No
Autonegotiation Yes
Auto-MDI/MDIX Yes
Hub propagation delay 0.64 to 0.68 µs
Power supply unit
Input voltage range 18 to 30 VDC
Current consumption Max. 150 mA
Power consumption Max. 3 W
Variant Switched-mode power supply with reverse polarity protection diode, no overvoltage protection
Electrical properties
Electrical isolation
Ports isolated from each other, ground and power supply.

Power supply and ground isolated.
Operating conditions
Mounting orientation
Face-up Yes
Vertical Yes
Degree of protection per EN 60529 IP20
Ambient conditions
Temperature
Operation
Face-up -25 to 60°C
Vertical -25 to 60°C
Storage -40 to 85°C
Transport -40 to 85°C
Relative humidity
Operation 5 to 95%, non-condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical properties
Note Order 1x terminal block TB704 separately.
Installation Top-hat rail installation, top-hat rail adapter is included in delivery.
Dimensions
Width 115 mm
Height 43 mm (51 mm with top-hat rail)
Depth 86 mm
Numero materiale:
0AC808.9-1
Descrizione:
8-port industrial hub (layer 2), 24 VDC, 10/100 Mbit/s with autonegotiation, automatic MDIX, order terminal block TB704 separately!
Accessori obbligatori
Terminal blocks
0TB704.9 Accessory terminal block, 4-pin, screw clamp terminal block 2.5 mm²
0TB704.91 Accessory terminal block, 4-pin, push-in terminal block 2.5 mm²
Aggiornamenti HW di Automation Studio Versione (data) Download
V4.0 HW Upgrade (0AC808.9-1) EXE / 914 KB
Certificati Versione (data) Download
ABS Certificate of Product Design Assessment - X20 IO Series PDF / 2 MB
EU Declaration of conformity PLC X20 PDF / 169 KB
Lloyds Register PDF / 502 KB
Documentazione Versione (data) Download
Data sheet 0AC808.9-1 PDF / 251 KB
Redundancy for control systems PDF / 9 MB
E-CAD (Electro o EPLAN Template) Versione (data) Download
equipment EPLAN P8 from V2.4 EXE / 4 MB
M-CAD (Mechan. Template) Versione (data) Download
3D File DXF/STEP 0AC808.9-1 ZIP / 741 KB

Si prega di scegliere il Paese e la lingua

B&R Logo