DWL@DWL10000693297
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
|---|---|---|---|---|---|---|
| 1.04 | * | 04.08.2022 | 693 KB | ZIP | UPG_MPC3100_MTCX_V0104_EFI.zip | |
| Popis |
APC 3100 mobile firmware upgrade (MTCX) --------------------------------------------------------------- ATTENTION! Possible upgrade problems and version dependency ---------------------------------------------------------------- 1. Do not reset or switch off the device during the upgrade process !!! 2. If a UPS is connected to the system, the battery unit must be disconnected or the Power button must be pressed (to set the system in standby mode) after the upgrade is done, but before the required Power Off/On is done. Otherwise the firmware upgrade is not complete, because the UPS will provide the system with power. ---------------------------------------------------------------- Version 01.04 / 01/27/2022 / MIK !MANDATORY UPDATE! ---------------------------------------------------------------- Content LIESMICH.txt 01.04 NEW README.txt 01.04 NEW STARTUP.nsh 01.00 MTCXMPC3100.nsh 01.00 MTCXSVC.efi 19.52 NEW 63893_0.fw 01.04 NEW 10402_0.fw 01.04 NEW Change(s) 63893_0.fw, 10402.fw (MTCX Firmware): - Support for 5ACCIFM0.FPC3-000 interface card and necessary optimizations in the NMI handling. MTCXSVC: - Minor optimizations and bug fixes. ATTENTION! Possible upgrade problems and version dependency, see above. |
|||||
| Verze | Jazyk | Operační systém | Datum | Velikost | Typ | Stáhnout |
| 1.03 | * | 21.06.2021 | 693 KB | ZIP | UPG_MPC3100_MTCX_V0103_EFI.zip | |
| Popis |
APC 3100 mobile firmware upgrade (MTCX) ---------------------------------------------------------------- ATTENTION! Possible upgrade problems and version dependency ---------------------------------------------------------------- 1. Do not reset or switch off the device during the upgrade process !!! 2. If a UPS is connected to the system, the battery unit must be disconnected or the Power button must be pressed (to set the system in standby mode) after the upgrade is done, but before the required Power Off/On is done. Otherwise the firmware upgrade is not complete, because the UPS will provide the system with power. ---------------------------------------------------------------- Version 01.03 / 05/26/2021 / MIK !MANDATORY UPDATE! ---------------------------------------------------------------- Content LIESMICH.txt 01.03 NEW README.txt 01.03 NEW STARTUP.nsh 01.00 MTCXMPC3100.nsh 01.00 MTCXSVC.efi 19.40 63893_0.fw 01.03 NEW 10402_0.fw 01.03 NEW Change(s) 63893_0.fw, 10402.fw (MTCX Firmware): - Optimizations power supply. - Support for 5MPC3100.K35F-000. ATTENTION! Possible upgrade problems and version dependency, see above. |
|||||
