Terminal block
Note Mechanical removal aid
Nominal data per UL
Number of pins 18
Type of terminal block Screw clamp terminal block variant
Cable type Only copper wires (no aluminum wires!)
Pitch 3.5 mm
Connection cross section
AWG wire 28 to 14 AWG
Wire end sleeves with plastic covering 0.20 to 1.50 mm²
Single-wire 0.20 to 1.50 mm²
Fine-stranded wires 0.20 to 1.50 mm²
With wire end sleeves 0.20 to 1.50 mm²
Electrical properties
Nominal voltage 300 V
Nominal current 10 A / contact
Contact resistance ≤4.2 mΩ
Número de material:
7TB718.9
Descripción:

The single-row, 18-pin 7TB718 terminal block is used to connect to I/O modules. Removal is simplified by two ejection levers on the terminal block.

Documentación Versión (fecha) Descargar
Datasheet TB718 PDF / 142 KB
M-CAD (plantillas mecánicas) Versión (fecha) Descargar
3D STEP file 7TB718.9 ZIP / 152 KB

Seleccione país e idioma

B&R Logo