Acceso

0ACST052.1

General information

B&R ID code	0x1404
Status indicators	Module status, network status
Diagnostics
Module status	Yes, using LED status indicator and software
Network status	Yes, using LED status indicator and software
Power consumption	6.3 W
Certifications
CE	Yes
UKCA	Yes
UL	cULus E115267 Industrial control equipment

Interfaces

Type	4x OPC UA over TSN 1x Ethernet
Standard (compliance)	IEEE 802 (standard Ethernet), IEEE 802.1Q (TSN), OPC UA
Variant	5x RJ45 shielded
Line length	Max. 100 m between 2 stations (segment length)
Transfer rate	100 Mbit/s and 1 Gbit/s
Transfer
Physical layer	100BASE-TX/1000BASE-T
Half-duplex	No
Full-duplex	Yes
Autonegotiation	Yes
Auto-MDI/MDIX	Yes

Power supply

Nominal voltage	24 VDC, SELV/PELV
Voltage range	20.4 to 28.8 VDC
Fuse	3 A slow-blow
Reverse polarity protection	Yes

Electrical properties

Electrical isolation	Ethernet isolated from each other and from power supply

Operating conditions

Mounting orientation
Horizontal	Yes
Vertical	Yes
Installation elevation above sea level
0 to 2000 m	No limitation
>2000 m	Reduction of ambient temperature by 0.5°C per 100 m
Maximum	4000 m
Pollution degree per EN 60664-1	2
Overvoltage category per EN 60664-1	2
Degree of protection per EN 60529	IP20
Operating position	Indoor use only

Ambient conditions

Temperature
Operation
Horizontal mounting orientation	-25 to 60°C
Vertical mounting orientation	-25 to 50°C
Derating	See section "Mounting orientations and derating".
Storage	-40 to 85°C
Transport	-40 to 85°C
Relative humidity
Operation	5 to 95%, non-condensing
Storage	5 to 95%, non-condensing
Transport	5 to 95%, non-condensing

Mechanical properties

Dimensions
Width	25 mm
Length	100 mm
Height	100 mm
Weight	280 g

Número de material:

0ACST052.1

Descripción:

5-port 100/1000 Mbit Ethernet layer 2 industrial switch, 4-port TSN, 1-port Ethernet uplink (RJ45, layer 2), 24 VDC, terminal block 0TB2103.9110 included

Actualizaciones de firmware	Versión (fecha)	Descargar
Firmwareupgrade 0ACST052.1		ZIP / 43 MB Para descargar se debe iniciar sesión

Actualizaciones de hardware de Automation Studio	Versión (fecha)	Descargar
V4.12 HW Upgrade (0ACST052.1)		EXE / 5 MB Para descargar se debe iniciar sesión

Certificados	Versión (fecha)	Descargar
E115267 UL CoC X20		PDF / 1 MB Para descargar se debe iniciar sesión

Documentación	Versión (fecha)	Descargar
Data sheet 0ACST052.1		PDF / 8 MB Para descargar se debe iniciar sesión
OPC UA over TSN technology description		PDF / 7 MB Para descargar se debe iniciar sesión
TSN Switch User's Manual		PDF / 12 MB Para descargar se debe iniciar sesión

E-CAD (plantillas Electro o EPLAN)	Versión (fecha)	Descargar
Makro-/Artikeldaten 4.0.0 (0ACST052.1)		EXE / 884 KB Para descargar se debe iniciar sesión