General information
B&R ID code 0xF9B8
Status LED 1x red/green; configurable, dimmable
2x red/green/blue; configurable, dimmable
Buzzer Yes
Brightness sensor Yes
Certifications
UN ECE-R10 Yes
CE Yes
UKCA Yes
Controller
Operating system PPT50 system
Processor
Type ARM Cortex-A9, dual core
Clock frequency 800 MHz
Flash 512 MB
DRAM 1 GB
Display
Type TFT color
Diagonal 7.0"
Colors 16.7 million (RGB, 8 bits per channel)
Resolution WVGA, 800 x 480 pixels
Contrast Typ. 600:1
Viewing angles
Horizontal Direction L / Direction R = 70°
Vertical Direction U / Direction D = Typ. 60°
Backlight
Type LED
Brightness Typ. 500 cd/m²
Brightness (dimmable) Yes
Half-brightness time 50,000 h
Touch screen
Type Multi-touch
Technology PCT (projected capacitive touch)
Surface Glass, chemically hardened (6H)
Screen rotation Yes
Interfaces
Interface IF1
Type Ethernet
Variant M12, D-coded
Transfer rate 10/100 Mbit
Interface IF3
Type USB 2.0
Variant On multi-header
Current-carrying capacity Max. 0.5 A
Digital inputs
Quantity 8
Nominal voltage 12 / 24 VDC
Input voltage 9 to 32 VDC
Input circuit Sink
Input filter
Hardware Approx. 20 ms
Software No
Input current
Typ. 1.3 mA (at 12 VDC)
Typ. 2.5 mA (at 24 VDC)
Input resistance Typ. 9 kΩ
Switching threshold Typ. 50% of the supply voltage
Digital outputs
Quantity 4
Variant Source (current-sourcing FET)
Nominal voltage 12 / 24 VDC
Nominal output current Max. 0.5 A permissible continuous current
Output protection
Shutdown in the event of overcurrent or short circuit,
integrated protection for switching inductive loads
Diagnostic status Status display via read-back measurement
RDS(on) Max. 100 mΩ
Residual voltage <0.1 V at 0.5 A nominal current
Additional functions
Overload shutdown / short-circuit shutdown: Yes (for each channel); must be acknowledged by user

Hardware filter read-back measurement: Approx. 20 ms
Software filter read-back measurement: No
Short-term overcurrents during the switch-on procedure are tolerated.
Electrical properties
Nominal voltage 12 / 24 VDC
Power consumption Max. 10.5 W
Fuse No
Reverse polarity protection Yes
Short-circuit proof Yes
Operating conditions
Mounting orientation
Any Yes
Degree of protection per EN 60529 IP66
Ambient conditions
Temperature
Operation -20 to +70°C housing surface
Storage -20 to 80°C
Transport -20 to 80°C
Mechanical properties
Front
Design Black
Dimensions
Width 198 mm
Height 141 mm
Depth 53.15 mm
Weight 963 g
Material number:
6PMT50.0702-19B
Description:
Power Panel T50 mobile, 7.0", glass front, 1x Ethernet. CPU and memory: 800 MHz dual core (ARM Cortex-A9), 1 GB RAM, 512 MB onboard flash drive. Display and touch screen: 7.0", 800 x 480 (WVGA) resolution, projected capacitive touch screen, multi-touch support, glass front with black frame, landscape and portrait format configurable with software. Interfaces: 1x Ethernet 10/100 Mbit/s, 1x USB 2.0 on multi-header. Client software: Integrated service page, VNC client, embedded web browser.
Optional Accessories
Brackets
6PM.AC.PAN-070 T50 mobile 7 inch, panel installation set
6PM.AC.RAM-001 RAM installation set 1 inch B-ball, diamond plate for panel, including screws, short connecting arm, round base plate, suitable for T50 mobile 5", 7"
6PM.AC.RAM-002 RAM installation set 1.5 inch, C-ball, diamond plate for panel, including screws, medium connecting arm, round base plate, suitable for T50 mobile 5", 7", 10.1"
Mounting tools
X67ACTQMX X67 torque wrench set, for X67 M8 and M12 connectors, for hex-head connectors
Other
6PM.AC.CLP-100 100x retaining clips for Power Panel T-Series mobile
6PMTBT50.01-00 T50 mobile, connector for Superseal header, with connector contacts and dummy plugs
POWERLINK/Ethernet
X67AC2E01 X67 male M12 connector, 4-pin, D-keyed, shielded, insulation piercing connection
POWERLINK/Ethernet-Cable
X67CA0E41.0010 POWERLINK/Ethernet connection cable, RJ45 to M12, 1 m
X67CA0E41.0020 POWERLINK/Ethernet connection cable, RJ45 to M12, 2 m
X67CA0E41.0030 POWERLINK/Ethernet connection cable, RJ45 to M12, 3 m
X67CA0E41.0050 POWERLINK/Ethernet connection cable, RJ45 to M12, 5 m
X67CA0E41.0150 POWERLINK/Ethernet connection cable, RJ45 to M12, 15 m
X67CA0E41.0500 POWERLINK/Ethernet connection cable, RJ45 to M12, 50 m
X67CA0E61.0010 POWERLINK/Ethernet connection cable, M12 to M12, 1 m
X67CA0E61.0020 POWERLINK/Ethernet connection cable, M12 to M12, 2 m
X67CA0E61.0050 POWERLINK/Ethernet connection cable, M12 to M12, 5 m
X67CA0E61.0100 POWERLINK/Ethernet connection cable, M12 to M12, 10 m
X67CA0E61.0150 POWERLINK/Ethernet connection cable, M12 to M12, 15 m
X67CA0E61.0200 POWERLINK/Ethernet connection cable, M12 to M12, 20 m
X67CA3E41.0150 POWERLINK/Ethernet connection cable, RJ45 to M12, can be used in cable drag chains, 15 m
Service access cap
X90AC-RP-SC-00 X90 service access cap replacement part set 1x silicone profile gasket, orange 1x silicone profile gasket, yellow 1x service access cap with ejection function
Wiring harness
6PMCAT50.02-00 T50 mobile, wiring harness starter set for T50 mobile, 2 m length, for Superseal connection
Automation Studio HW Upgrades Version (Date) Download
V4.7 HW Upgrade (6PMT50.0702-19B) EXE / 6 MB
Certificates Version (Date) Download
UN ECE-R10 PDF / 378 KB
Documentation Version (Date) Download
Power Panel T50 mobile user's manual PDF / 7 MB
E-CAD (Electro or EPLAN Templates) Version (Date) Download
Makro-/Artikeldaten 4.0.2 (6PMT50.0702-19B) EXE / 610 KB
Makro-/Artikeldaten 4.0.2 (6PMT50.0702-19B) EXE / 613 KB
Linux Images Version (Date) Download
V4.7 LX Upgrade PMT50 EXE / 223 MB
V4.7 LX Upgrade PMT50 ZIP ZIP / 228 MB
M-CAD (Mechan. Templates) Version (Date) Download
3D files STP 6PMT50.0702-19B ZIP / 6 MB

Please choose country and language

B&R Logo